Below are 2 before photos of two very worn crossovers at a residential property in the Perth foothills suburb of South Guildford.
We removed a section adjacent to the footpath from both crossovers to enable the new surface to tie in flush to the concrete.
The road was recently resurfaced and left high which enabled us to tie in to the road edge of both crossovers.
The following photos show the completed two crossovers.
Following the high sections being cut out from both crossovers the surfaces were swept clean, tacked with a bitumen emulsion and resurfaced with a minimum 25mm thick layer of 7mm granite black hotmix/asphalt - levelled and compacted.
Comments